Academic Qualifications:

Degree	Subjects	Institution/Awarding Body	Year
Ph.D		Texas, USA	1998
			-

Ph.D. Thesis:
N/A

Research Supervised:

Designation (if any):
N/A

Organization / Institution Name:
N/A

Complete web address of your CV/Resume, if it is on the web:
http://www.jbaas.com/editorial/anwarul_haq.php

Research Publications:

International Research Journal 64

National Research Journals 24

International Conference Proceedings 81

National Conference Proceedings 06

Abstracts 55

Books/Proceedings 12

Patent 01

List of National/International publications :

International Research Journal Publications:

Preparation and analysis of evaporated rhenium superconducting thin films by A. ul Haq, O. Meyer and R. Smithey: KFK Report Nr. 2881 (1979), 95 96

Influence of ion irradiation on resistivity and superconducting transition temperature of Re films by A. ul Haq, O. Meyer and M. Kraatz: KFK Report Nr. 2881 (1979), 97 98

Mean free path of electrons in rhenium by A. ul Haq and O. Meyer: KFK Report Nr. 3051 (1980), 112 113

Disorder analysis in argon implanted rhenium single crystals by E. Friedland, A. ul Haq and M. Kraatz: KFK Report Nr. 3051 (1980), 114 115

Rhenium nitride formation by nitrogen implantation in rhenium by A. ul Haq, O. Meyer and M. Kraatz: KFK Report Nr. 3051 (1980), 116 117

Ion induced properties of superconducting rhenium films by A. ul Haq: Ph.D. Thesis, KFK Report Nr. 3312 (1982)

Electrical and superconducting properties of rhenium thin films by A. ul Haq and O. Meyer: Thin Solid Film 94 (1982), 119 132

Superconductivity and structural disorder in ion irradiated rhenium films by A. ul Haq and O. Meyer: J. Low Temp. Phys 49 No. 1/2 (1982), 151 165

Superconducting and electrical properties of rhenium nitride and amorphous rhenium prepared by ion implantation by A. ul Haq and O. Meyer: J. Low Temp. Phys. 50 No. 1/2 (1983), 123 133

Minute accumulation of metallic particles cause short circuit in grinder An SEM study by A. ul Haq: Metallography 11 (1985), 83 88

Mechanical properties of maraging steels by A. ul Haq, F.H. Hashmi and A.Q. Khan: Metals and Materials 1 (1985), 227 228

Microscopic determination of austenite in 18% Ni maraging steels by M. Farooq, A. ul Haq, F.H. Hashmi and A.Q. Khan: Metallography 20 (1987), 377 383

Some remarks on the hardness and yield strength of aluminum alloy 7075 as a function of retrogression time by F. Habiby, A. ul Haq, F.H. Hashmi and A.Q. Khan: Met. Trans. 18A (1987), 350 353

Simple technique for revealing prior austenite grain boundaries in CrMoV turbine rotor steels by A. ul Haq, F.H. Hashmi and A.Q. Khan: Metallography 21 (1988), 233 235

The origin and influence of residual magnetism on the electron beam welding of 18% Ni maraging steels by M. Farman, A. ul Haq, Q.R. Ali and A.Q. Khan: Materials and Design 9 No. 5 (1988), 263 270

Influence of austenite on the coercive force, electrical resistivity and hardness of 18% maraging steels by F. Habiby, A. ul Haq and A.Q. Khan: Design and Materials 13 No. 5 (1992), 259-264

Machine induced phase transformation in a maraging steel by F. Habiby, T.N. Siddiqui, H. M. Afzal Khan, A. ul Haq and A.Q. Khan: Met. Sc. and Engg. A159 (1992), 261 265

Austenite determination by eddy current measurements in a maraging steel by F. Habiby, T.N. Siddiqui, S. Khan, A. ul Haq and A.Q. Khan: NDT and E Interna. 25 No. 3 (1992), 145 146

The rolling texture of 18%Ni maraging steel by A. ul Haq and A.Q. Khan: J. Mat. Engg. and Performance 2 No. 1 (1993), 89 96

Simple method for direct synthesis of YBa2Cu4O8 at atmospheric oxygen pressure by Nawazish A. Khan, N. Baber, M. Zafar Iqbal and A. ul Haq: J. Appl. Phys. Lett. 63 No. 2 (1993), 257-259

Storage induced reverse martensitic transformation in 18%Ni 350 maraging steel by A. ul Haq, H. , F. Habiby and A.Q. Khan: Mat. Sc. Lett. 12 (1993), 1539 1540

Commentary (guest editorial) by A. ul Haq: J. Mat. Engg. 2 (1993), 615

Influence of second phase particles on plastic deformation and lattice reorientation of single crystals during uniaxial compression by F. Habiby, H. : S. Khan, A. ul Haq and A.Q. Khan: J. Materials Science 29 (1994), 2013-2016

Influence of aging on the texture development of tensile deformed duplex steels by A. ul Haq, H. Weiland, and H.-J. Bunge: J. Materials Science 29 (1994), 2168-2176

Texture and microstructure in duplex stainless steels by A. ul Haq, H. Weiland and H.-J. Bunge: Materials Science and Technology 10 (1994), 289-298

Atmospheric pressure synthesis of the Yba2Cu4O8 by Cu2(CN)2 by Nawazish Ali Khan, M. Zafar Iqbal, N. Baber and A. ul Haq: Superconductor Science and Technology 7 (1994), 563-568

Concentration dependence of DC-conductivity of Pd-polyacrylate by S.U. Rahman, F.A. Khwaja, A. ul Haq and M.S. Zafar: Polymer Degradation and Stability 45 (1994), 267-272

Properties and applications of 18%Ni-maraging steels by F. Habiby, A. ul Haq and A.Q. Khan: Materials Technology 9 (1994), 212-225

Fabrication of cadmium telluride thin films using stacked elemental layer deposition technique by S. Arshed, I.A. Qazi and A. ul Haq: Soviet J. Solar Energy 1-3 (1995), 174-177

Evidence of a simple cubic phase in electron beam vacuum evaporated indium oxide on glass substrate by M. Abbas, I.A. Qazi, A. Samina, M. Masaood, A. Majeed and A. ul Haq: J. Vac. Sc and Techl. A13(1) (1995), 151-152

Ordering behaviour of Ni-5at% Al alloy by Gohar Ayub, Farid A. Khwaja, A. ul Haq and Z. Ahmad: Acta Metall. Mater. 43(4) (1995), 1457-1465

In-situ microhardness measurements of Ni-5at% Al alloy by Gohar Ayub, Farid A. Khwaja and A. ul Haq: J. Mat. Sc. Lett. 14 (1995) 802-804

Lattice changes in the martensite phase due to ageing in 18 wt% nickel maraging steel grade 350 by F. Habiby, T.N. Siddiqui, H. , A. ul Haq and A.Q. Khan: J. Mat. Sc. 31(1996), 305-309

High Tc superconductivity in Bi1.6Pb.4Sr2Ca2Cu2+XOY compound by Zahida Ali, A. Maqsood, M. Maqsood, S.M. Ramay, M. Yousuf and A. ul Haq: Superconductor Sc. and Techl. 9 (1996), 197-200

Amorphous superconducting transformation in bismuth based high-Tc superconducting rods by M.N. Khan and A. ul Haq: J. Mat. Engg. and Performance 5 (1996), 445-451

Texture Development in Dual-Phase Cold-Rolled 18 pct Ni maraging steel by Z. Ahmad, M. Farooque, A. ul Haq and A.Q. Khan: Met Trans 28A (1997), 2459-65

Fatigue Crack Propagation in Maraging Steel by K. , A. Tauqir, A. ul Haq and A.Q. Khan: Materials Science and Technology 13 (1997), 1063-65

Sintering effect on Bi(Pb)-Sr-Ca-Cu-O high-Tc superconductors by M. Anisur Rehman, M. Maqsood, N. Ahmed, A. Maqsood, A. ul Haq: J. Mat. Sc. 33 (1998), 1789-93

Fabrication and transport properties of long-length doped Bi1.7Pb0.3Sr2Ca2-xMxCu3Oy conductors (M=B, Nb or Ag) by M.N. Khan, A.N. Kiyani and A. ul Haq: J. Mat. Sc. 33 (1998), 2365-69

The formation of reverted austenite in 18% Ni 350 grade maraging steel by M. Farooque, H. Ayub, A. ul Haq and A.Q. Khan: J. Mat. Sc. 33 (1998), 2927-2930

Effect of repeated thermal cycling on the formation of retained austenite in 18% Ni 350 grade maraging steel by M. Farooque, H. Ayub, A. ul Haq and A.Q. Khan: Materials Transaction JIM 39 (1998), 995-999

Cathodic Arc Deposition of Titanium Nitride Coatings on Commercial Steels by Z. Iqbal, A. Rauf, A. Ali, A. ul Haq and A.Q. Khan: Vacuum 51(4) (1998), 629-633

Effect of Retained Austenite on Gas Nitriding of a High Strength Steel by K. , A. Tauqir and A. ul Haq: Mat. Sc. and Tech. 14 (1998), 1218-20

Influence of gas nitriding on fatigue resistance of nitriding steels by K. , A. Tauqir, A. ul Haq and A.Q. Khan: J. Fatigue 21 (1999) 163-168

Evaluation of Halide-Activated pack boriding of Inconel 722 by W. Muhammad, K. Hussain, A. Tauquir, A. ul Haq and A.Q. Khan: Metall. Trans. 30A (1999), 670-675

Correlation between work hardening and stress relaxation in polycrystalline nickel by M.Z. Butt, N. Kauser and A. ul Haq: Czek J. Phys. 49 (1999), 967-972

Role of Ferrite/Pearlite banded structure and segregation on mechanical properties of microalloyed hot rolled steel by F.A. Khalid, M. Farooque, A. ul Haq and A.Q Khan: Mat. Sc. and Techl. 15 (1999), 1209-15

What was the best innovation of 20th century? by A. ul Haq: Mat. Engg. and Perf. 8 (1999), 627

Dimensional Anistropy in 18 Pct Ni Maraging Steel by M. Farooque, S. Qaisar, A. ul Haq, and A.Q. Khan: Met. & Mat. Trans. 32A (1999), 2572-2576

An analysis of conical tool perforation of ductile metal sheets by M. Nazeer Malik, Ather Naeem, M. Afzal khan, A. ul Haq and A.G. Atkins: Interna. J. Mech. Sciences 42 (2000), 1391-1403

Phase Evolution and Micro-structural Development in sol-gel derived MSnO3 (M=Ca, Sr and Ba) by A.M. Azad, M. Hashim, S.Baptist, A.Badri, and A. ul Haq: J. Mat. Sc. 35 (2000), 5475-5483

Response of Ductile Metal Sheet Parameters to the Cone angle of Indenting Conical Tool and Fracture Toughness Evaluation by Malik M. Nazeer, M. Afzal Khan, A. Naeed, and A. ul Haq: J. Mat. Eng. & Perf. 9(5) (2000), 489-498

Causes of Fatigue Failure in the Main Bearing of an Aero-engine by A. Tauqir, I. Salam, A. ul Haq, and A.Q. Khan: Engg. Failure Analysis 7 (2000), 127-144

Thermal Conductivity of Ceramic Fibres as a Function of Temperature and Press Load by Asghari Maqsood, M. Anis-ur-Rehman, Vadim Gumen and Anwar ul Haq: J Phys. D: Appl. Phys. 33 (2000), 2057-2063

Optical X-rays Studies of Low Resistivity CdS thin films by A.K Aqili, Z. Ali, A. Maqsood , I,Qazi, A.Haq, M.Ahmad, and M. Abbas: J.Mater . Sci. Letters (2000) 19, 1229-12231.

Structural and optical properties of low resistivity CdS thin films. A.K Aqili, Z. Ali, A. Maqsood, I.Qazi, A.Haq, M.Ahmad, and M. Abbas: J. Mat. Sc. Lett. (2000) 19, 1229.

High Temperature Thermal Conductivity of Ceramic Fibers by V. Gumen, A. ul Haq, B. Ilyas, and A. Maqsood: J. Mat. Eng. & Perf. 10(4) (2001) 475-478

Magnetic properties of Isotopic Fe-28-Cr-15-Co permanent magnets with addictives, by Z. Ahmad, A. ul Haq and T. Abbas: Physica B 321 (2002), 54-59

Effect of Mo addition on Magnetic properties of Fe-28-Cr-15-Co permanent magnets with addictives, by Ahmad, A. ul Haq and T. Abbas: Physica B 321 (2002), 96-103

Ball Indentation Analysis of a Tough Polymer Sheet, by M.M. Nazeer, M. Afzal Khan, A Naeem, and A. ul Haq: J. Mat. Eng. and Perf. 12 (2003), 561-568.

Optimal response of conical tool semi angle in ductile metal sheets indentation and its governing machines by Malik M. Nazeer, M. Afzal Khan and A-ul Haq: Published in an International Jr. Structural Engineering and Mechanics, Vol.16, No.1 (2003) 47 – 62

Influence of Ti Content onMagnetic and Microstructural properties of Fe-28Cr-15Co- 3.5Mo Permanent Magnets by Z. Ahmad, A. ul Haq, S. W. Hussain, A. Ali, T. Abbas: JMMM 257 (2003), 397-402.

Grain size effect on magnetic properties of Fe-28Cr-15Co permanent magnets as a function of Mo contents by Z. Ahmad, and A. ul Haq: Physica Status Solidi Journal C1 (2004) 1732-1735.

Development of Texture and microstructure in Fe-28Cr-15Co-3.5Mo-1.83Ti permanent magnet alloys by Z. Ahmad and A. ul Haq: Accepted for publication in Physica Status Solidi Journal (2005).

Simultaneous Measurement of Thermal Conductivity and Thermal Diffusivity of various Rocks as a function of temperature by Asghari Maqsood, M. Maqsood, Aurangzeb, Nasim A. Sherazi, Azra Rasool, Tanveer Mahmood, M. Zafrullah, A. ul Haq and S.R.H. Baqri: Superconductor Sc. and Technology – accepted (2005)

Texture in thin Fe3O4 Film on High Strength Steel by J. Iqbal, A. Ali, A. Tauqir and A. ul Haq: Mater. Sci. Technl. - accepted (2005).

Long time aging characteristics of Al-Mg-Si Commercial Alloy by S. Khan, M. Farooque, A. ul Haq and A.Q. Khan: submitted in J. Mat. Sc. - accepted (2005).

National Research Journal Publications:

The degree of crystallite orientation and tensile strength of Pakistan Cottons by I.K. Yousufzai and A. ul Haq: Pakistan Cottons 16 No. 3 (1972), 63 76.

2. Determination of the degree of mercerisation using x ray diffraction technique by A. ul Haq and I.K. Yousufzai: Pakistan Cottons 18 No. 2 (1974), 83 88.

A method for testing the uniformity of cotton blends by I.K. Yousufzai and A. ul Haq: Pakistan Cottons 18 No. 4 (1974), 147 155.

A note on the physical characteristics of gibberellic acid treated cottons by I.K. Yousufzai, A. ul Haq and H.U. Rehman: Pakistan Cottons 19 No. 1 (1974), 55 59.

Effect of slack mercerisation on the fine structure and physical characteristics of cottons fibers by A. ul Haq, I.K. Yousufzai, H.U. Rehman and M. Sayeed: Pakistan Cottons 19 No. 2 (1975), 123 126.

Maturity test by x ray method by I.K. Yousufzai and A. ul Haq: Pakistan Cottons 19 No. 2 (1975), 135 138.

Influence of gibrallic acid on the fiber characteristics of Giza 26, M4 and STD 1 cottons by I.K. Yousufzai, A. ul Haq and H.U. Rehman: Pakistan Cottons 19 No. 2/3 (1975), 198.

Fine structure and mechanical properties of Pakistan cottons Part 1 by I.K. Yousufzai, A. ul Haq and H.U. Rehman: Pakistan Cottons 20 No. 4 (1975), 64-73

9. Effect of gibbrallic acid treatment on the degree of crystallite orientation, crystallinty index and other fiber characteristics of AC 134 cottons by I.K. Yousufzai, A. ul Haq and H.U. Rehman: Pakistan Cottons 24 No. 1 (1980), 131 138

Question of secondary peak in hardness versus retrogression curve of AA 7075 aluminum alloys by F. Habiby, A. ul Haq, F.H. Hashmi and A.Q. Khan: Pak. J. Sc. and Indus. Res. 31 No. 5 (1988), 315 318

Creep properties of 7075 aluminum alloy under intermittent stressing by A. ul Haq, F.H. Hashmi and A.Q. Khan: Pak. J. Sc. and Indus. Res. 32 No. 3 (1989), 141 144.

Orientation determination of single crystal by computer generated algorithm by F. Habiby, Z. Ahmad, H. , A. ul Haq and A.Q. Khan: Pakistan J. Sc. and Indus. Res. 36 No. 2/3 (1993), 51 53.

Application of x ray diffraction in materials science by A. ul Haq: J. Nat. Sciences and Maths. 33 No. 1 (1993), 29-43.

Textural features observed under polarized light microscope by F. Habiby, Z. Ahmad, S. Khan, A. ul Haq and A.Q. Khan: Pak. J. Sc. and Indus. Res. 38(3/4) (1995), 123-126.

New technological materials: Ceramics and polymers by M.A. Hameed Khan, A. ul Haq and A.Q. Khan: Vision 1 (Oct-Dec, 1995), 51-63.

Mechanical anisotropy in a duplex stainless steel sheet by A. ul Haq: Vision 1 (Jan-March, 1996), 55-60.

The mineralogical and geo-chemical variations in rock salt from Khewra area, Pakistan by M. Javed, Z. Ahmad, S.R.H. Baqri and A. ul Haq: Science Vision 2 (July-September, 1996), 49-57.

A study of Pakistani Gypsum by x-ray powder diffraction by Z. Ahmad, S.R.H. Baqri, A. ul Haq and A.Q. Khan: Pak. J. Sc. and Indus. Res. 39 (1996), 110-114.

Microstructural modifications in Al-Si alloy to produce a model composite material by F. Habiby, S. Khan, A. ul Haq and A.Q. Khan: Science Vision 2 (Oct.-Dec., 1996), 58-60.

Stress relaxation in titanium polycrystals by M. Amir, A. Habib, M.Z. Butt and A. ul Haq: J. Nat. Sciences and Maths 37 No. 1 7 2 (1997), 21-29.

Grain growth in aluminum by I.M. Ghouri, M.Z. Butt and A. ul Haq: J. Nat. Sciences and Maths 37 No. 1 & 2 (1997), 183-187.

Quenching: an important factor in heat treatment by S. Khan, M. Afzal Khan and A. ul Haq: Science Vision 4(1) (1998), 44-51

Preparation and characterization of high-Tc superconductors by A. ul Haq: J. Nat. Sciences and Maths 38 No. 1 & 2 (1998).

Nitinol Shape Memory Alloys and their Medical Applications by A. ul Haq, and M. Saif ullah Awan: Proc. Pak. Acad. Sci. 37(2) (2000), 253-265.

Publications in International Refereed Proceedings:

1. Proceedings of 1st International Conference on “Frontier of Advanced Engineering Materials (FAEM-04), 20-22 September 2004, Lahore, Editors: Shahzad Alam and A. ul Haq: Published by PCSIR Laboratories Complex Ferozepur Road, Lahore in press.

Proceedings of seminar on “Embedded Systems”, 14th October 2004, Islamabad, Editors: Saiful Islam Qureshi , Tariq M. Ubaid Wahla and A. ul Haq: Published by National Institute of Electronics, Islamabad, in press.

Influence of radiation damage on the superconducting and electrical properties of Re thin films by A. ul Haq and O. Meyer: Nuc. Phys. methods in Mat. Res., Proc. 7th Div. Confr. (1980), pp. 322 324.

Micro structural changes during retrogression and reaging in AA 7075 A TEM study by F. Habiby, A. ul Haq, F.H Hashmi and A.Q. Khan: Aluminum Technology'86, The Institute of Metals, London (1986), pp. 414 420

Electrical and magnetic properties of double aged 18% Ni maraging steels by M. Farooque, F. Habiby, A. ul Haq, F.H. Hashmi and A.Q. Khan: Proc, ICOMAT '86, Japan (1986), pp. 572 577

a a transformation in 18% Ni maraging steels by F. Habiby, A. ul Haq, F.H. Hashmi and A.Q. Khan: Proc. ICOMAT '86, Japan (1986), pp. 560 565

Lattice imaging of E phase in annealed AA 7075 by F. Habiby, A. ul Haq, F.H. Hashmi and A.Q. Khan: Proc. 2nd Beijing Conference and Exhib. on Instr. Analysis (1987), pp. 165 166

In-situ TEM study of precipitation and growth of MgZn2 phase in AlZnMgCu alloy by F. Habiby, A. ul Haq, F.H. Hashmi and A.Q. Khan: Proc. Phase transformation '87 Cambridge, U.K. (1987), pp. 186 188

nfluence of annealing on the texture of 20% tensile deformed Remanit steels, A. ul Haq, H. Weiland and H. J. Bunge: Advanced Materials; Proc. First ISAM, Islamabad (1989) Editors: A. ul Haq, N. Ahmad and A.Q. Khan (1990) pp. 142 148

Machining induced phase transformation in ultra high strength 18% Ni maraging steel by T.N. Siddiqui, M. Afzal Khan, A. ul Haq and A.Q. Khan: Advanced Materials; Proc. First ISAM, Islamabad (1989) Editors: A. ul Haq, N. Ahmad and A.Q. Khan (1990) pp. 198 202

Analysis of preferred orientations in duplex chromium nickel steels H. J. Bunge, A. ul Haq and H. Weiland: Proc. First Cr steel and alloys Congress, Cape Town SAIMM (1992) vol 2, pp. 197 201

Martensite reversion due to processing and storage conditions in 18% Ni Maraging steel by H. , A. ul Haq and A.Q. Khan: Advanced Materials 91; Proc. 2nd ISAM, Islamabad (1991) Editors: A. ul Haq, N. Ahmad and A.Q. Khan (1992), pp. 164 169

Effects of heat treatment atmospheres on the surface of 18% Ni Maraging steel M. Afzal Khan, A. Ali, H.M. Noshad and A. ul Haq: Advanced Materials 91; Proc. 2nd ISAM, Islamabad (1991) Editors: A. ul Haq, N. Ahmad and A.Q. Khan (1992), pp. 371 375

Embrittlement in leaf spring steels A case study by T.N. Siddiqui, A. ul Haq and A.Q. Khan: Advanced Materials 91; Proc. 2nd ISAM, Islamabad (1991) Editors: A. ul Haq, N. Ahmad and A.Q. Khan (1992), pp. 507 512

A novel method of micro texture analysis using electron back scattered patterns by F. Habiby, A. ul Haq and A.Q. Khan: Selected Topics on Condensed Matter Physics; Proc. ICCMPA, Bahrain (1992) Editor: W.E. Alanser, pp. 229-232

A Study of martensite to austenite transformation in maraging steel by M. Afzal Khan, T.N. Siddiqui, F. Habiby, A. ul Haq and A.Q. Khan: Selected Topics on Condensed Matter Physics; Proc. ICCMPA, Bahrain (1992) Editor: W.E. Alanser, pp. 233-236

Experimental methods of texture analysis by A. ul Haq: Selected Topics on Condensed Matter Physics; Proc. ICCMPA, Bahrain (1992) Editor: W.E. Alanser, pp. 251-254

Influence of second phase particles on the development of texture in composite materials by F. Habiby, A. ul Haq and A.Q. Khan: New Materials and Contemporary Applications, Proc. FASAS Sym. Ed. A. ul Haq, Pak Academy Science, Islamabad (1993) pp. 40 45

Use of cuprous cyanide for the synthesis of Y Ba Cu superconductors by Nawazish A. Khan, N. Baber, M. Zafar Iqbal and A. ul Haq: New Materials and Contemporary Applications, Proc. FASAS Sym. Ed. A. ul Haq, Pak. of Academy Science, Islamabad (1993) pp. 73 81

The technology of ceramic processing by M.A. Hameed Khan, A. ul Haq and A.Q. Khan: New Materials and Contemporary Applications, Proc. FASAS Sym. Ed. A. ul Haq, Pak Academy Science, Islamabad (1993) pp. 132 142

Ahmad and A. ul Haq: in Advanced Materials 93; Proc. 3rd Interna. Sym. on Advanced Materials (1993) Editors: A. ul Haq et. al. (1994), pp. 73-79

Temperature and time dependance of dc-conductivity in Pd Polyacrylate by Farid A. Khwaja, Shafiq ur Rehman and A. ul Haq: in Advanced Materials 93; Proc. 3rd Interna. Sym. on Advanced Materials (1993) Editors: A. ul Haq et. al. (1994), pp. 233-240

Improved mechanical properties due to double stage annealing in maraging steels by F. Habiby, Amjad Ali, T.N. Siddiqui, A. ul Haq and A.Q. Khan: in Advanced Materials 93; Proc. 3rd Interna. Sym. on Advanced Materials (1993) Editors: A. ul Haq et. al. (1994), pp. 315-319

Deformation and recrystallisation texture in particle containing single crystals by F. Habiby, S. Khan, Z. Ahmad, H. , A. ul Haq and A.Q. Khan: in Advanced Materials 93; Proc. 3rd Interna. Sym. on Advanced Materials (1993) Editors: A. ul Haq et. al. (1994), 375-379

Effect of Texture and Order on the Mechanical Properties of Ni 5at% Al Alloy by Farid A. Khwaja, Gohar Ayub, Z. Ahmad and A. ul Haq: in Advanced Materials 93; Proc. 3rd Interna. Sym. on Advanced Materials (1993) Editors: A. ul Haq et. al. (1994), pp. 380- 385

Effect of rolling modes on the development of texture in maraging steels grade 350 by F. Habiby, Z. Ahmad, H. , A. ul Haq and A.Q. Khan: in Advanced Materials 93; Proc. 3rd Interna. Sym. on Advanced Materials (1993) Editors: A. ul Haq et. al. (1994), pp. 386-390

A study of surface films formed during maraging by M. Afzal Khan, Jamila Waris, A. ul Haq, M. Suleman and A.Q. Khan: in Advanced Materials 93; Proc. 3rd Interna. Sym. on Advanced Materials (1993) Editors: A. ul Haq et. al. (1994), pp. 460-467

Analysis of curvature generation and fracture toughness of indented aluminum sheet by M. Afzal Khan, Ather Naeem, M. Nazeer Malik and A. ul Haq: in Advanced Materials 93; Proc. 3rd Interna. Sym. on Advanced Materials (1993) Editors: A. ul Haq et. al. (1994), pp. 706-713

Failure of 18% Ni 350 maraging steel discs under dynamic loading by M. Afzal Khan, M. Tasleem, A. ul Haq, M.Z. Khan and M. Ashraf: in Advanced Materials 93; Proc. 3rd Interna. Sym. on Advanced Materials (1993) Editors: A. ul Haq et. al. (1994), pp. 748-753

Amourphous to superconductor phase transformation in Bi-based high Tc superconducting rods by M.N. Khan and A. ul Haq: Proc. Electronic Properties of Metal/Non- metal Microsystems, The 5th International Workshop, September 11-14, 1995, Polanica, Poland

Computer Modeling of Elasto-Plastic Fracture Mechanics of Ball Indentation in Ductile Aluminum Sheet by M. Afzal Khan, Malik Muhammad Nazeer, A. Naeem, A-ul-Haq, A.G. Atkins: Proc. 4th European Conference on Advanced Materials and Processes, EUROMAT 95, PP 491-494.

Mathematical Analysis of Indented Aluminum Sheet Curvature by Malik Muhammad Nazeer, M. Afzal Khan, A. Naeem, A-ul-Haq, A.G. Atkins: Proc. International Conference on Applied and Pure Mathematics ICPAM 95.

Texture Study in Cold Deformed 18% Ni-350 Maraging Steel Containing Austenite by Z. Ahmad, M. Farooque and A. ul Haq: in Advanced Materials 95; Proc. 4th Interna. Sym. on Advanced Materials (1995) Editors: A. ul Haq et. al. (1996), pp. 92-99

Influence of Heat Treatment on Hardening Response of Al-Mg-Si Commercial Alloys S. Khan, F. Habiby, A. Ali, A. ul Haq and A.Q. Khan: in Advanced Materials 95; Proc. 4th Interna. Sym. on Advanced Materials (1995) Editors: A. ul Haq et. al. (1996), pp. 374-379

Processing of AlNiCo Magnets by A. Ali, A. Tauqir, A. ul Haq and A.Q. Khan: in Advanced Materials 95; Proc. 4th Interna. Sym. on Advanced Materials (1995) Editors: A. ul Haq et. al. (1996), pp. 393-398

Powder Production Processes for AlNiCo Permanent Magnet Alloy by M. Khalid, A. Ali, A. Tauqir, A. ul Haq, F.H. Hashmi and A.Q. Khan: Advanced Materials 95; Proc. 4th Interna. Sym. on Advanced Materials (1995) Editors: A. ul Haq et. al. (1996), pp. 399-406

The Kinetics, Structure, Mechanism and Processing and Properties of Bi-2223 Long- length Rods and Powder Compacted Specimens by M.N. Khan, A. Memon, S. Al-Dallal and A. ul Haq: in Advanced Materials 95; Proc. 4th Interna. Sym. on Advanced Materials (1995) Editors: A. ul Haq et. al. (1996), pp. 419-428

Correlation between work hardening and stress relaxation in polycrystalline nickel by M.Z. Butt, N. Kauser and A. ul Haq: Advanced Materials 95; Proc. 4th Interna. Sym. on Advanced Materials (1995) Editors: A. ul Haq et. al. (1996), pp. 614-617

Deformation and Recrystallization texture in Low and High Stacking Fault Energy Materials by F. Habiby, Z. Ahmad, A. ul Haq and A.Q. Khan: in Advanced Materials 95; Proc. 4th Interna. Sym. on Advanced Materials (1995) Editors: A. ul Haq et. al. (1996), pp. 634-638

DEN Fracture Study in the Ductile Half Hard Aluminum Sheet by M. Afzal Khan, A. ul Haq and A.G. Atkins: in Advanced Materials 95; Proc. 4th Interna. Sym. on Advanced Materials (1995) Editors: A. ul Haq et. al. (1996), pp. 639-645

Synthesis of Bi-Sr-Ca-Cu-O wires for Perspective Applications by A. ul Haq and M.N. Khan: Physics and Materials Science in High Temperature Superconductivity IV, NATO Advanced Research Workshop, July 21-27, 1996, Strbske Pleso, Slovak Republic. in press

Mechanical Properties and Annealing Texture of Zr Sheets by Hanifur Rahman, A. ul Haq and F.A. Khwaja: in Phase Transformations-96; Proc. 1st International Conference on Phase Transformations (1996) Editors: A. ul Haq, Anjum Tauqir and A.Q. Khan (Dec 1996), pp.14-18

Dimensional Anisotropy in 18 wt % Ni-350-maraging steel by M. Farooque, S. Qaiser, Z. Ahmed and H. Ayub: Proceedings of 1st International Conference on Phase Transformations (1996) Editors: A. ul Haq, Anjum Tauquir and A. Q. Khan (Dec 1996), pp.131-137.

Growth of High-Tc Phase and Structure of Ag-doped BPSCCO (2223) System by M.N. Khan and A. ul Haq: in Phase Transformations-96; Proc. 1st International Conference on Phase Transformations (1996) Editors: A. ul Haq, Anjum Tauqir and A.Q. Khan (Dec 1996), pp.131-137

Phase Transformations in Bi-based High-Tc Superconducting Rods by M.N. Khan and A. ul Haq: in Phase Transformations-96; Proc. 1st International Conference on Phase Transformations (1996) Editors: A. ul Haq, Anjum Tauqir and A.Q. Khan (Dec 1996), pp.144-148

Low Field Magnetic Relaxation Studies of Melt Textured Grown High-Tc Superconductors by Arif Mumtaz, S.K. Hasanain and A. ul Haq: in Phase Transformations-96; Proc. 1st International Conference on Phase Transformations (1996) Editors: A. ul Haq, Anjum Tauqir and A.Q. Khan (Dec 1996), pp.149-154

Synthesis and Structure of a Protective Oxide Coating by A. Tauqir, J. Iqbal and A. ul Haq: in Phase Transformations-96; Proc. 1st International Conference on Phase Transformations (1996) Editors: A. ul Haq, Anjum Tauqir and A.Q. Khan (Dec 1996), pp.204-207

Effect of R-ratio on Fatigue Crack Growth Characteristics of Maraging Steel by K. , A. Tauqir, A. ul Haq and A.Q. Khan: Advances in Fracture Research; Proc. Ninth Interna. Confr. on Fracture, April 1-5, 1997, Sydney, Australia vol 3: Fatigue of Metallic and Non-Metallic Materials and Structures eds. B.L. Karihaloo et. al. (1997) pp. 1603-1611

A study of inhomogeneity in maraging steels by M. Farooque, s. Qaiser, A. ul Haq and A.Q. Khan: Proc. First Asean Microscopy Conference, 27-30th Nov. 1997, Senai, Johore, Malaysia (1997), pp.162-164

Microstructural study of a maraging steel after repeated thermal cycling by M. Farooque, H. Ayub and A. ul Haq: Proc. First Asean Microscopy Conference, 27-30th Nov. 1997, Senai, Johore, Malaysia (1997), pp.332-333

On the formation of reverted austenite in 18% Ni 350 grade maraging steel by M. Farooque, H. Ayub, A. ul Haq and A.Q. Khan: Proc. the Asian science Seminar on New Direction in Transmission Electron Microscopy and Nano-Characterization of Materials, Japan, March 17-26, 1997 pp. 283-288

Electronic Structure and Superconducting Properties of Doped BPSCC (2223) System by M.N. Khan, A.N. Kayani and A. ul Haq: Proc. 5th Intna. Confr. on Materials and Mechanisms of Superconductivity, Feb. 28-March 4, 1997 (J. Physica C), Beijing, China

Structure, kinetics and physical properties of (Bi1-xCux)Sr2YCu2Oy system by M.N. Khan, A.N. Kiyani, A. Memon and A. ul Haq: in Advanced Materials 97; Proc. 5th Interna. Sym. on Advanced Materials (1997) Editors: M. Afzal Khan, A. ul Haq et. al. (1998), pp.187-190

Sintering effect on Bi(Pb)-Sr-Ca-Cu-O high-Tc superconductors by M. Attaur Rehman, M. Maqsood, N. Ahmed, A. Maqsood, A. ul Haq: in Advanced Materials 97; Proc. 5th Interna. Sym. on Advanced Materials (1997) Editors: M. Afzal Khan, A. ul Haq et. al. (1998), pp.204-209

Influence of cold deformation texture in 316-stainless steel by Z. Ahmad, M.Farooque, S.H. Khan and A. ul Haq: in Advanced Materials 97; Proc. 5th Interna. Sym. on Advanced Materials (1997) Editors: M. Afzal Khan, A. ul Haq et. al. (1998), pp.378-382

Grain growth in aluminum by I.M. Ghouri, M.Z. Butt and A. ul Haq: in Advanced Materials 97; Proc. 5th Interna. Sym. on Advanced Materials (1997) Editors: M. Afzal Khan, A. ul Haq et. al. (1998), pp.398-400

Metal sheet behaviour in conical tool indentation by M. Nazeer Malik, Ather Naeem, M. Afzal khan, A. ul Haq and A.G. Atkins: in Advanced Materials 97; Proc. 5th Interna. Sym. on Advanced Materials (1997) Editors: M. Afzal Khan, A. ul Haq et. al. (1998), pp.552-558

Metallographic study of a curvature produced by indentation in aluminum sheet by M.A. Khan, S. Qaisar, A. ul Haq and A.G. Attkins: in Advanced Materials 97; Proc. 5th Interna. Sym. on Advanced Materials (1997) Editors: M. Afzal Khan, A. ul Haq et. al. (1998), pp.559-565

Effect of process parameters on the characteristics of Ti2N coatings by Z. Iqbal, M. Rauf, Amjad Ali and A. ul Haq: in Advanced Materials 97; Proc. 5th Interna. Sym. on Advanced Materials (1997) Editors: M. Afzal Khan, A. ul Haq et. al. (1998), pp.688-693

Texture Development in an electron beam rapidly solidified steel by Z. Ahmed, I. Salam, A. Tauqir and A. ul Haq: in Advanced Materials-97; Proc. 5th Interna. Sym. on Advanced Materials (1997) Editors: M. Afzal Khan, A. ul Haq et. al. (1998), pp.726-731.

Effect of base metal microstructure on phosphating of engineering components by P.H. siddiqui, M. Khalid, A. Ali and A. ul Haq: in Advanced Materials 97; Proc. 5th Interna. Sym. on Advanced Materials (1997) Editors: M. Afzal Khan, A. ul Haq et. al. (1998), pp.726-731

Effect of heat treatment conditions on the surface of high strength steel by A. ul Haq, M.A. Khan and A.Q. Khan: Proc. Asian Conference on heat treatment of materials, Beijing, China (1998) pp. 148-154

Effect of magnetic annealing on the properties of an Fe-Cr-Co alloy by A. Ali and A. ul Haq: Proc. Asian Conference on heat treatment of materials, Beijing, China (1998) pp. 364-369.

Overload effect on fatigue crack propagation in 2024-Al Alloy by K. Hussain, A. Tauquir, A. ul Haq and A.Q. Khan: Proc. 7th International fatigue congress " Fatigue 99", 8-12th June, 1999, Beijing, China, Ed. Xue-Ren Wu and Zhong-Guang Wang Vol. 2 (1999) pp.1021-1026

The role of heat treatment in magnetic properties of Fe-43-Cr-32.4-Co-24.6 alloy by Z. Ahmad, A. ul Haq, T. Abbas and A. Q. Khan: Proc. 3rd International Workshop on Materials Science (1999) pp.146-149.v

Effect of thermomagnetic treatment on magnetic properties and microstructure of Fe41Cr32.5Mo2.0Ti0.5 alloy by Z. Ahmad, A. Ali, A. ul Haq, T. Abbas and A. Q. Khan: submitted in proc. Of 1st Regional Conference on Magnetic and superconducting Materials MSM’99, Tehran, Iran 27-30 (1999) 1068-1074.

Crack growth in half hard Aluminum sheet by K. Hussain, M.A. Khan, A. ul Haq and A.Q. Khan: Proc. 7th International fatigue congress " Fatigue 99", 8-12th June, 1999, Beijing, China, Ed. Xue-Ren Wu and Zhong-Guang Wang Vol. 4 (1999) pp.2831-2836

Effect of Plasma Treatment on the Superconducting Property of YBCO System by K.A. Chaudary, M.I. Anwar, M. Zakaullah, K. Alamgir, G. Murtaza and A. ul Haq: 6th International Symposium on Advanced Materials (1999), pp 88-90.

The Elasto-Plastic Fracture Mechanics in Ductile Metal Sheets by M. A. Khan, M. N. Malik, A. Naeem, A. ul Haq, A.G. Atkins: 6th International Symposium on Advanced Materials (1999) pp. 219-222

Aomalous Grain-Growth in Commercial Lead by M. Afzal, I.M. Ghauri, M.Z. Butt and A. ul Haq: 6th International Symposium on Advanced Materials (1999), pp 219-222

Failure of Gun Barrel Casing of a Fighter Plane by M. Mansoor, I. Salam, A. Tauquir and A. ul Haq: 6th International Symposium on Advanced Materials (1999), pp. 231-233

Mechanical Behavior of Borided Low Carbon Steel by W. Muhammad, K. Hussain, A. Tauqir and A. ul Haq: 6th International Symposium on Advanced Materials (1999), pp. 299-303

Effect of Temperature on Gamma Prime and Coating in Super Alloy MAR-M2000 Hf by A. Nusair, I. Salam, A. Tauqir and A. ul Haq: 6th International Symposium on Advanced Materials (1999), pp. 456-458

Prametric Study of Plasma Spray Coating on Mild Steel by Z. Iqbal, Rauf, F. A. Khalid, A. ul Haq and A.Q. Khan: 6th International Symposium on Advanced Materials (1999), pp. 459-463

ZnTe Thin Films prepared by Two Sources Evaporation Methods by A.K.S. Aqili, Z. Ali. A. Maqsood, I. A. Qazi, A. ul Haq, M. Ahmed and M. Abbas: 6th International Symposium on Advanced Materials (1999), pp. 525-528

Tool Angle Optimization in Conical Tool Indentation of Ductile Metal Sheet by M. Nazeer Malik, M. Afzal Khan, Ather Naeem, A. ul Haq and A.G. Atkins: submitted in "IMPLAST" 2000, 4-6th May, 2000, Melborne, Australia

Phase Transformation and Shape Memory Effect in Ti-50% Ni alloy by M/s Awn, M. Farooque, S. Qaiser and A. ul Haq: Proceeding of the International Symposium on Advanced Materials, 2001 Editors: A.A. Mazher, M. A. Khan, J.A. Mirza and A.Q. Khan(2002), pp 236-241

Development of Fe-Cr-Co-Mo isotopic hard magnets by Z. Ahmed, S.W. Hussain, A. Ali, A. ul Haq and T.Abnas: 7th International Symposium on Advanced Materials (2002), pp. 115-118

Optical and structural properties of two sourced evaporation of CdTe Films by Z. Ali, A.K.S. Aqili, A. Masood, A. Ahmed, Z. Ahmed and S.M.J. Akthar: Accepted for publication in 7th International Symposium on Advanced Materials (2002) pp. 353-359

Effect of antimony doping on the structure, electrical and optical properties of TIN oxide thin films by A.K. S. Qqili, Z. Ali, M. Shafique, I.A. Qazi, M. Abbas, A. ul Haq, Z. Ahmed and A. Maqsood: 7th International Symposium on Advanced Materials (2002), pp. 420-424

Sheet Materials Comparative Response in Ball Indentation by Malik M. Nazeer, M. Afzal Khan, A-ul-Haq: Proc. 8th International Symposium on Advanced Materials ISAM-2003.

Publications in National Referred Proceedings:

Residual stress measurements by x ray diffraction by A. Hayan and A. ul Haq: Solid State Physics; Proc. IVth National Conference (1984), Editors: K. Ahmed and F.A. Khawaja (1987); Quaid e Azam University, Islamabad; pp. 53 62.

Effect of plastic deformation on electrical resistivity Cu 10% (wt) Al by T.N. Siddiqui and A. ul Haq: Solid State Physics; Proc. IVth National Conference (1984), Editors: K. Ahmed and F.A. Khwaja (1987); Quaid e Azam University, Islamabad; pp. 238 244.

Maraging steels; Their uses and importance by A. ul Haq: Proc. IVth National Confr. (1984), Editors: K. Ahmed and F.A. Khwaja (1987); Quaid e Azam University, Islamabad; pp. 238-244

Microscopic studies of pistons by A. ul Haq: Solid state Physics; Proc. IVth National Conference (1984), Editors: K. Ahmed and F.A. Khwaja (1987); Quaid e Azam University, Islamabad, pp. 325 339

Effect of solvent on chromium deductibility by AAS by M. Javed and A. ul Haq: Solid state Physics; Proc. IVth National Conference (1984), Editors: K. Ahmed and F.A. Khwaja (1987); Quaid e Azam University, Islamabad, pp. 353 358.

Hardness variation in AA-7075 baffle-A case study by A. Shamim, M. Afzal Khan and A. ul Haq: Pro. 25th Annual Convention of IEP, Lahore vol. 2 (1994), pp. 55-62.

Patent:
Process for the Production of PCSIR Lemonade Concentrate for Carbonated Beverage Industry by Sherin Iqbal, Azra Yasmin, Surraya Wadud, Engr. Muhammad Tariq and Dr. Anwar ul Haq, Pak. Patent Application No. 740/2004.

Abstracts: 

Changes in X-ray patterns of starches after oxidation treatment by sodium metaperiodate by P. Kassenbeck and A. ul Haq: Proc. 25th Starch Convention (1977), Detmold (Germany), pp.70

Structure, resistivity and superconductivity of implanted and irradiated Re-thin films by A. ul Haq and O. Meyer: Proc. Interna. Confr. IBMM, USA (1980), G17

Superconductivity of Rhenium nitride prepared by ion implantation by A. ul Haq and O. Meyer: Verhand. DPG (VI), 16 (1981), 483

Changes in X-ray powder diffractograms of AlZnMgCu alloy due to aging by F. Habiby, A. ul Haq, F.H. Hashmi and A.Q. Khan: Proc. Interna. Symp. on powder diffraction at Frementle, 20-23rd Aug. 1987, pp.25

Application of texture analysis to materials science by A. ul Haq: Proc. 2nd Symp. on "Frontiers of Physics" 26-31st Dec. 1988, QAU, Islmabad

Characterization of locally available dental amalgam alloys by Mian Waqar Usman, M.I. Qureshi and A. ul Haq: National seminar on Metallurgy, PIME, 29th Dec. 1990

A study of martensite to austenite transformation in maraging steel by H. , F. Habiby, M. Afzal Khan and A. ul Haq: National Seminar on Metallurgy, PIME, 18th Dec. 1991

Texture analysis by four circle Goniometer in polycrystalline materials by A. ul Haq and A.Q. Khan: Proc. first ASCA Confr. 1992 (Abstract), pp.150

Physical and Mechanical properties of Maraging steels by A. ul Haq: COMSTECH Workshop on Recent Advances in Materials Science, 2-5th December 1992, Islamabad

A study of surface film formed in various atmospheres during martensite transformation of 18% Ni-maraging steel by M. Afzal Khan, Jamila Waris, M. Suleman, A. ul Haq and A.Q. Khan: National seminar on metallurgy, PIME, 23rd Dec. 1992

Development of texture in single crystal and polycrystalline pure aluminum by F. Habiby, Z. Ahmad, A. ul Haq and A.Q. Khan: National seminar on metallurgy, PIME, 23rd Dec. 1992

Effect of cold rolling on the texture development of a maraging steel by H. , A. ul Haq and A.Q. Khan: National seminar on metallurgy, PIME, 23rd Dec. 1992

Failure of EN45 and Boron steels Grass Mower Cylinder Blades-A case study by M. Afzal Khan, A. ul Haq and A.Q. Khan: Proc. 9th National Conference on Engineering Fracture Mechanics, 24-29th April 1993

Normal Pressure Synthesis of 124 Superconductor and Ca Substitution at Y-sites by Nawazish Ali Khan, N. Baber, M. Zafar Iqbal and A. ul Haq: Proc. 3rd Interna. Sym. on Advanced Materials, 20-24th September 1993, Islamabad, Pakistan (Abstract)

Effect of deformation mode on texture development by F. Habiby, Z. Ahmad, A. ul Haq and A.Q. Khan: National seminar on Development of Metal Industry in Pakistan, PIME, 30th December 1993

An insight into orientation determination of single crystals by F. Habiby, Z. Ahmad, H., A. ul Haq and A.Q. Khan: Proc. PIP annual conference, 2-5th April 1993, Lahore

Texture analysis-state of the art by A. ul Haq and A.Q. Khan: Proc. First International Spring School and Symposium on Advances in Materials Science (SAMS-94), 15-20th March 1994, Cairo, Egypt.

Effect of deformation mode on texture development by F. Habiby, A. ul Haq and A.Q. Khan: Proc. First International Spring School and Symposium on Advances in Materials Science (SAMS-94), 15-20th March 1994, Cairo, Egypt and National seminar on Development of Metal Industry in Pakistan, PIME, 30th December 1993

Infra-red Absorption in YBa2Cu4O8 by A. ul Haq, M. Nawazish Ali Khan, M. Zafar Khan and N. Baber: Physics and Materials Science in High Temperature Superconductivity III, NATO Advanced Research Workshop, Potocarras, Greece (1994)

Making advanced versatile by texture tailoring by F. Habiby, A. ul Haq and A.Q. KHan: International Seminar on New Technologies and their Application in Industry, 18-20th Dec. 1994, International Islamic University, Islamabad, Pakistan (abstract) pp. 9

The effect of alloying element on microstructure and texture development by F. Habiby, Z. Ahmad, A. ul Haq and A.Q. Khan: Annual National Seminar on Metallurgy, 22nd Dec. 1994, Lahore

Investigation of hardness response in Al-based commercial alloy by S. Khan, F. Habiby, A. ul Haq and A.Q. Khan: Annual National Seminar on Metallurgy, 22nd Dec. 1994, Lahore

Elastic and plastic mechanics of ball indentation in ductile sheets by M. Afzal Khan, Ather Naeem,M. Nazeer Malik, A. ul Haq and A.G. Atkins: Annual National Seminar on Metallurgy, 22nd Dec. 1994, Lahore

High Tc Superconductivity in Bi1.6Pb0.4Sr2Ca2Cu2+xOy Compounds by Zahida Ali, Aghari Maqsood, M. Maqsood, S. Ramay, Z. Akbar, M. Yousuf and A. ul Haq: Proc. 4th Interna. Sym. on Advanced Materials, 17-21st September 1995, Islamabad, Pakistan

Stress Relaxation in Ti by Shahid Khan, Farid A. Khwaja, Kaleem Akhtar, A. ul Haq and M.Z. Butt: Proc. 4th Interna. Sym. on Advanced Materials, 17-21st September 1995, Islamabad, Pakistan

Mechanical Properties of Ti-50 at% Nb Alloy by M. Majid Ummer, Farid A. Khwaja, Kaleem Akhtar, A. ul Haq and M.Z. Butt: Proc. 4th Interna. Sym. on Advanced Materials, 17-21st September 1995, Islamabad, Pakistan

Effect of Concentration and Temperature on Stress Relaxation of Ti-Nb Alloy by Tallat Siddique, Farid A. Khwaja, Kaleem Akhtar, A. ul Haq and M.Z. Butt: Proc. 4th Interna. Sym. on Advanced Materials, 17-21st September 1995, Islamabad, Pakistan

Texture Development in the Tensile Deformed Cu-Zn Alloy by F. Habiby, H. , A. ul Haq and A.Q. Khan: Proc. 4th Interna. Sym. on Advanced Materials, 17-21st September 1995, Islamabad, Pakistan

Microstructural Modification in Al-Si Alloys to Produce a Model Composite Material by F. Habiby, S. Khan, A. ul Haq and A.Q. Khan: Proc. 4th Interna. Sym. on Advanced Materials, 17-21st September 1995, Islamabad, Pakistan

Microstructural Observations of the Operative Slip Systems in Al-based Alloys by F. Habiby, A. ul Haq and A.Q. Khan: Proc. 4th Interna. Sym. on Advanced Materials, 17-21st September 1995, Islamabad, Pakistan

Re-designing of Deep Drawing Process for Producing Aluminum Gauge Covers - A case Study by Amjad Ali, F. Habiby, T.N. Siddiqui and A. ul Haq: Proc. 4th Interna. Sym. on Advanced Materials, 17-21st September 1995, Islamabad, Pakistan

On the formation of reverted austenite in 18% maraging steel by M. Farooque, H. Ayub, A. ul Haq and A.Q. Khan: Ist International Conference on Phase Transformationsm, 1-3 sept. 1996, Islamabad, Pakistan (abstract), pp. 15

On the Phase Transformations in Fe-Co-Cr Permanent Magnetic Materials by A. Ali and A. ul Haq: in Phase Transformations-96; Proc. 1st International Conference on Phase Transformations (1996), pp. 15

Effect of Partial ß-Phase Transformation on the Stress Relaxation Response of 58/42 Brass Polycrystals by M.Z. Butt, M.S. Khiliji, G. Shaheen and A. ul Haq: in Phase Transformations-96; Proc. 1st International Conference on Phase Transformations (1996) Editors: A. ul Haq, Anjum Tauqir and A.Q. Khan (Dec 1996), pp. 27

A Study of Surface Films Formed on 18% Ni-350 Maraging Steel During Heat Treatment by A. ul Haq, M. Afzal Khan, J. Waris and M. Suleman: 4th International Conference on Advances in surface engineering, 14-17th May 1996, Newcastle upon Tyne, U.K. in press

Ductile magnets: state of the art by A. Ali and A. ul Haq in National seminar on engineering materials and Metallurgy, Karachi 1-2 Oct. 1996

Synthesis and characterization of Ag, Nb and B doped 2223 supeconductors by A. ul Haq, A.N. Kiyani and M.N. Khan: PIP International Conference, 30th March-3rd April 1997, Lahore

Failure analysis of an aircraft engine ball bearing by I. Salam, A. Tauqir and A. ul Haq: 12th national conference on engineering of fracture mechanics, 5-6th May 1997, Mehran University of Engineering and Technology, Jamshoro.

Effect of gas Nitriding on Fatigue Properties of Maraging Steel by K. Hussain, A. Tauqir, A. ul Haq and A.Q. Khan submitted in Interna. Confr. on engineering against fatigue, U.K. 1997

Gamma phase formation and its effect on magnetic properties in an AlNiCo alloy by A. Ali, M. Khalid and A. ul Haq: 5th Interna. Sym. on Advanced Materials, 21-25th sept. 1997, Islamabad, Pakistan (abstract), pp.68

A study in hot rolled spring steel material by I. , M.B. Bhatti, A. ul Haq and A.Q. Khan: 5th Interna. Sym. on Advanced Materials, 21-25th sept. 1997, Islamabad, Pakistan (abstract), pp.68

Vacuum induction melting of high alloy material by Imran Nasim Khan, A. Tauquir and A. ul. Haq: 5th Interna. Sym. on Advanced Materials, 21-25th sept. 1997, Islamabad, Pakistan (abstract), pp.83

The stress corrosion cracking behaviour of nitrided maraging steel in 3.5% NaCl environment by I. Hussain, K. Hussain, A. ul Haq and A.Q. Khan: 5th Interna. Sym. on Advanced Materials, 21-25th sept. 1997, Islamabad, Pakistan (abstract), pp.124

Electrochemical study of bioler tube failure from an AC plant I. Hussain, S.M. Adnan Iqbal, A. ul. Haq and A.Q. Khan: 5th Interna. Sym. on Advanced Materials, 21-25th sept. 1997, Islamabad, Pakistan (abstract), pp.125

The Influence of Heat Treatment on Boriding of an Inconel Alloy by W. Mohammad, K. Hussain, A. Tauqir and A. ul Haq: 5th Interna. Sym. on Advanced Materials, 21-25th sept. 1997, Islamabad, Pakistan (abstract), pp.132

Effect of sand composition on hot corrosion of aluminide coatings by I. Salam, A. Tauqir and A. ul Haq: 5th Interna. Sym. on Advanced Materials, 21-25th sept. 1997, Islamabad, Pakistan (abstract), pp.132

Heat treatment of high strength steels in a vacuum furnace by M. Afzal Khan, A. ul Haq and A.Q. Khan: Proc. Asian Conference on heat treatment of materials, Beijing, China (1998) pp. 440

Study of phase transformation in NiTi shape memory alloy by M. Farooque, M.S. Awan, S. Qaiser and A. ul Haq: 7th National Symposium on "Frontiers of Physics", 19-21th Nov. 1998, Islamabad (abstract)

Vacuum arcs and wear resistant coatings by Z. Iqbal, A. Rauf, A. Ali, A. ul Haq and A.Q. Khan: 7th National Symposium on "Frontiers of Physics", 19-21th Nov. 1998, Islamabad (abstract)

Dimensional anisotropy in 18% Ni Maraging Steel by M. Farooque, S. Qaiser, H. Ayub, A. ul Haq and A.Q. Khan: 7th National Symposium on "Frontiers of Physics", 19-21th Nov. 1998, Islamabad (abstract)

Effect of time and temperature on the morphology of phosphate conversion coating on different steels by Pervaiz H. Siddiqui, T.M. Durrani and A. ul Haq: 7th National Symposium on "Frontiers of Physics", 19-21th Nov. 1998, Islamabad (abstract)

Electrochemical aspects of mild steel boiler tubes by I. , Adnan Iqbal, A. ul Haq and A.Q. Khan: 7th National Symposium on "Frontiers of Physics", 19-21th Nov. 1998, Islamabad (abstract)54.

Characterization of Boride layer in carbon steel by K. , W. Mohammad, A. Taquir and A. ul Haq: 7th National Symposium on "Frontiers of Physics", 19-21th Nov. 1998, Islamabad (abstract)

Production and Characterization of Alumina ceramic parts for laboratory useby M. Shoaib, A. ul Haq and H.M. Siddiqui: 7th National Symposium on "Frontiers of Physics", 19-21th Nov. 1998, Islamabad (abstract).

Books Written & Edited:

Biographical Notes on Eminent Muslim Scientists of South-Asia in the 14th Century Hijra: Edited by A. ul Haq, Athar Naeem , Volume-III (d.1960-1994 A.D.)

Effect of fine structure on the paste making and Backing properties of corn flours and their Proteins (in German) by P. Kassenbeck, A. ul Haq and R. Walz: Final Report Res. Project Nr. 3431 (1978), Fraunhoffer Gesellschaft, Karlsruhe, Germany.

Contribution to the crystal structure determination of Pb5P4O15 by A. ul Haq: Diplom Thesis, University of Karlsruhe (1978), Germany.

Der EinfluB von Strahlenschadigung und Ionenimplantation auf die Ubergangstemperatur zum Supraleiter, Tc und die Struktur von Re Schichten by A. ul Haq and 0. Meyer: KFK Report Nr. 10.02.03P03R (Dec 1980).

Advanced Materials; Proc. First International Symposium on Advanced Materials, 18 20th Sept. 1989, Islamabad Editors: A. ul Haq, N. Ahmad and A.Q. Khan: Published by Dr. A.Q. Khan Research Labs., Kahuta (1990).

Advanced Materials 91; Proc. Second International Symposium on Advanced Materials, 15 19th Sept. 1991, Islamabad Editors: A. ul Haq, N. Ahmad and A.Q. Khan: Published by Dr. A.Q. Khan Research Labs., Kahuta (1992)

New Materials and Contemporary Applications; Proc. FASAS Symposium Editor: A. ul Haq, Publisheed by Pakistan Academy of Sciences, Islamabad, (1993)

Advanced Materials 93; Proc Third International Symposium on Advanced Materials, 20 24th Sept. 1993, Islamabad Editors: A. ul Haq, F. Habiby and A.Q. Khan: Published by Dr. A.Q. Khan Research Labs., Kahuta (1994).

Advanced Materials 95; Proc Fourth International Symposium on Advanced Materials, 17 21st Sept. 1995, Islamabad, Editors: A. ul Haq, F. Habiby and A.Q. Khan: Published by Dr. A.Q. Khan Research Labs., Kahuta (1996).

Phase Transformations-96; Proceedings of First International Conference on Phase Transformations, 1-3rd September 1996, Islamabad, Editors: A. ul Haq, Anjum Tauqir and A.Q. Khan (Dec. 1996)

Advanced Materials 97; Proc Fifth International Symposium on Advanced Materials, 17 21st Sept. 1995, Islamabad, Editors: M. Afzal Khan, A. ul Haq, K. and A.Q. Khan: Published by Dr. A.Q. Khan Research Labs., Kahuta (1998).

Proceeding of the National Symposium on “Physics in Industry” 28-30th June 2001, Karachi, Editors: Mushtaq Ahmed and A. ul Haq: Published by Pakistan Council of Scientific & Industrial Research.